Volkswagen Caddy (2020-Current) Slimline II Roof Rail Rack Kit – by Front Runner

kr. 10.150,00

10 på lager

A roof rack is an invaluable tool for freeing up space inside your vehicle, even a minivan such as a Volkswagen Caddy. This lightweight, modular roof rack is designed specifically for the Volkswagen Caddy and features the Slimline II Tray, Wind Deflector, and three pairs of Rail Grip Feet to mount the Slimline II Tray to the roof rails of your Caddy. It is compatible with over 55 accessories so you can customize it to suit your commercial transport needs, lifestyle, and adventures.

Varenummer KRVC012T Kategorier , Mærke

This 1560mm/61.4” long, full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector, and (3) three pairs of Rail Grip Feet to mount the Slimline II Tray to the roof rails of your Volkwagen Caddy. This system installs easily with off-road tough feet that grip onto the existing factory/OEM roof rails. No drilling is required. All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. NOTE: Your vehicle must be equipped with the factory/OEM roof rails to use this rack kit. This rack kit can be removed leaving your vehicle’s roof and roof rails in their original condition. For a stronger expedition-grade cargo carrying solution, Front Runner may offer a specific Foot Rail System to mount the Rack Tray to your vehicle. Front Runner Foot Rail solutions can be installed by removing the factory roof rails or used if no factory roof rails are fitted. All Front Runner Racks are backed by a Limited Lifetime Warranty* Factory Rail Rack Kits are designed as a ”light duty” cargo solution. Please refer to your vehicle’s owner manual for the manufacturers’ recommended load rating and do not exceed these limits. For optimal load-carrying capacity, we recommend that there is no cargo overhang (excludes sports gear) and that all weight is distributed evenly across the rack. Factory Rail Rack Kits are not suited for extreme off-road conditions therefore, you should consider a different Front Runner mounting solution if this is your intended purpose. Please contact us for advice on specific mounting solutions for your vehicle and use.

Eventuelle manualer og samlevejledninger

  • https://content.frontrunneroutfitters.com/collateral/doc/F_KRVC012T.pdf
  • https://content.frontrunneroutfitters.com/collateral/doc/F_GOFR001.pdf
  • https://content.frontrunneroutfitters.com/collateral/doc/F_RRSTUNI_DE.pdf
  • https://content.frontrunneroutfitters.com/collateral/doc/F_RRSTUNI.pdf

Specifikationer

KRVC012T – Volkswagen Caddy (2020-Current) Slimline II Roof Rail Rack Kit – by Front Runner Consisting of: 3x GOFR001 – Rail Foot Base (Pair)3x GORR052 – Raised Rail Outer Grips / No. 33x GORR070 – Raised Rail Inner Grips / A2x RRAC904 – Plastic Spacer for Rail Foot Base / 10mm (Pair)1x RRSTD08 – SLII Tray – 1255mm(W)X1560mm(L) Material Used: Black epoxy powder – coated T6 aluminium High strength steel Approximate Installed Weight: 26.6kg (58.64lbs) The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2”) to the height of the Foot or Grab-on Foot listed above.If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2”) to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2”) to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof. Shipping Dimensions: Width: 440mm (17”) Length: 1730mm (68”) Height: 170mm (7”) Shipping Weight: Weight: 29kg (64lbs)